Power Cable


   E-Beam Cross linked Halogen Free Cables

   Ⅰ. Uses

  This product applies to rated voltage 450/750V and below AC or DC voltage of 1000V and below the electrica                      linstallations,instrumentation, telecommunications equipment, power and lighting circuits.

 

   Ⅱ. Product standards

   The national standard GB5023-1997, industry-standard JB8734.2-1998

 

   Ⅲ. The use of properties

   1. Cable's rated voltage U0 / U (phase voltage / line voltage) for 450/750V and 300/500V. When used for DC system,

   the system's nominal voltage should be no more than 1.5 times the rated voltage cables. Note that the system voltage

   to allow for a long time more than the system nominal voltage 10%, if the cable's rated voltage is at least equal to the    system's nominal voltage, then the cable may be higher than the rated voltage 10% of the operating voltage to use.

   2. Industry-standard provisions of the cable laying temperature should not be less than 0 ℃, outer diameter (D) is less      than 25mm to allow the cable bending radius shall be not less than 4D, outer diameter (D) for the 25mm and above, to    allow the cable bending radius shall be not small in 6D. National standard, enterprise standard cables should also be 

   the light of the conditions of use.

 

    Ⅳ. Model specification


Solar Cable Department

Tel:86-572-2166900 

Fax:86-572-2166915

Contact Person :YunLu Guan

Mob:13665754719

Email:solar@fr-cable.com



 Contact Us

Ⅰ. Uses

This product applies to rated voltage 450/750V and below AC or DC voltage of 1000V and below the electrical installations, instrumentation, telecommunications equipment, power and lighting circuits.

 

Ⅱ. Product standards

The national standard GB5023-1997, industry-standard JB8734.2-1998

 

Ⅲ. The use of properties

1. Cable's rated voltage U0 / U (phase voltage / line voltage) for 450/750V and 300/500V. When used for DC system, the system's nominal voltage should be no more than 1.5 times the rated voltage cables. Note that the system voltage to allow for a long time more than the system nominal voltage 10%, if the cable's rated voltage is at least equal to the system's nominal voltage, then the cable may be higher than the rated voltage 10% of the operating voltage to use.

2. Industry-standard provisions of the cable laying temperature should not be less than 0 ℃, outer diameter (D) is less than 25mm to allow the cable bending radius shall be not less than 4D, outer diameter (D) for the 25mm and above, to allow the cable bending radius shall be not small in 6D. National standard, enterprise standard cables should also be the light of the conditions of use.

 

Ⅳ. Model specification


Cords for Connecting

Powered by CloudDream